Forumitbr.com.br

Galera estou como endian 3.0 e preciso compilar o drive e1000e porém o comando rpmbuild não funfa, algum de vcs tem esse drive compilado para me passar ou pode me enviar um tuto de como instalar esse drive sem ser compilado?
Abraços

Experimenta os rpms da 2.5.1 , deve funcionar

http://repo.opensource-sw.net/efw/2.5.1 ... index.html

Lógico, não aplique no ambiente de produção

o .rpm que o Marcelo passou coloquei nesse anexo!!

ok valeu vou tentar aqui.

me diz uma coisa se eu instalar e configurar o 2.51 deixar tudo redondinho e depois atualizar pro 3.0 vai dar pau????

sim concerteza man nem faça isso... primeiro o endian 3.0 não trabalha mais com o dansguardian e outra o endian sempre muda os pacotes e bibliotecas!

mano obrigado pela ajuda mas agora da outro erro, quando tento instalar o rpm que esta aqui no tópico recebo esta mensagem

error: Failed dependencies:
        e1000e-driver is needed by e1000e-1.3.10a-2.endian2_2.6.32.43_57.e43.i586

ai vou instalar o driver para que possa dar certo e recebo esta outra menssagem.

Makefile:76: *** Kernel header files not in any of the expected locations.
Makefile:77: *** Install the appropriate kernel development package, e.g.
Makefile:78: *** kernel-devel, for building kernel modules and try again.  Stop.

mano como isso é chato srsrs

galera vcs podem por favor criar um rpm deste arquivo pra mim pq m eu endian não faz isso nem a pau
abraços e obrigado

segue veja se funfa rodei no meu lubuntu o rpmbuild. me fala se funfou 

mano obtive a seguinte resposta:

rpm -Uvh http://www.site000.com.br/info/e1000e-3.0.4-1.i386.rpm
Retrieving http://www.site000.com.br/info/e1000e-3.0.4-1.i386.rpm
Preparing...                ########################################### [100%]
  1:e1000e                ########################################### [100%]
original pci.ids saved in /usr/local/share/e1000e
cp: missing destination file
Try `cp --help' for more information.
WARNING: Running kernel is 2.6.32.43-57.e43.i686.PAE.  RPM supports kernels (  3.11.0-12-generic  )
bash: line 11: /usr/share/doc/e1000e-3.0.4/pci.ids.new: No such file or directory
bash: line 236: 5: Bad file descriptor
mv: missing file argument
Try `mv --help' for more information.

e muito obrigado pelo arquivo e pela ajuda:)

axo que esse tar que vc me mandou não suporta nesse kernel man!!!

então peguei ele no site da intel direto
mano to ficanod doido com isso ja que drive chato, estou usando o kernel 1686 para subir os 16gb de ram que tenho aqui, vc tem ou sabe onde tem algum drive que funcione nele?
abraços

tenta rodar esse comand rpm -Uvh --nodeps pacote.rpm. nesse pacote que ta no anexo

kkkk mano agora fudeu geral (desculpe a palavra) deu que esta instalado mas a placa não sobe olhe:


rpm -Uvh --nodeps http://www.site000.com.br/info/e1000e-1 ... 3.i586.rpm
Retrieving http://www.site000.com.br/info/e1000e-1 ... 3.i586.rpm
warning: /var/tmp/rpm-xfer.oBVIhm: Header V3 DSA signature: NOKEY, key ID b61a86c9
Preparing...                ########################################### [100%]
        package e1000e-3.0.4-1.i386 (which is newer than e1000e-1.3.10a-2.endian2_2.6.32.43_57.e43.i586) is already installed

qual o erro que apresenta quando sobe a placa? roda o dmesg e veja se ela se encontra lah ou lspci

Recebo isto ao executar o dmesg:



root@Firewall:~ # dmesg
[    0.000000] Linux version 2.6.32.43-57.e43.i686.PAE (root@andrew) (gcc version 4.1.2 20070626 (Endian 4.1.2-14)) #1 SMP Wed Aug 10 05:54:43 EDT 2011
[    0.000000] KERNEL supported cpus:
[    0.000000]  Intel GenuineIntel
[    0.000000]  AMD AuthenticAMD
[    0.000000]  NSC Geode by NSC
[    0.000000]  Cyrix CyrixInstead
[    0.000000]  Centaur CentaurHauls
[    0.000000]  Transmeta GenuineTMx86
[    0.000000]  Transmeta TransmetaCPU
[    0.000000]  UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000a74b4000 (usable)
[    0.000000]  BIOS-e820: 00000000a74b4000 - 00000000a74bb000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000a74bb000 - 00000000a844a000 (usable)
[    0.000000]  BIOS-e820: 00000000a844a000 - 00000000a8986000 (reserved)
[    0.000000]  BIOS-e820: 00000000a8986000 - 00000000ba1a8000 (usable)
[    0.000000]  BIOS-e820: 00000000ba1a8000 - 00000000ba3bc000 (reserved)
[    0.000000]  BIOS-e820: 00000000ba3bc000 - 00000000ba3d0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000ba3d0000 - 00000000ba4a4000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ba4a4000 - 00000000bafff000 (reserved)
[    0.000000]  BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
[    0.000000]  BIOS-e820: 00000000bb800000 - 00000000bfa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000043f600000 (usable)
[    0.000000] DMI 2.7 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x43f600 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]  00000-9FFFF write-back
[    0.000000]  A0000-BFFFF uncachable
[    0.000000]  C0000-CFFFF write-protect
[    0.000000]  D0000-E7FFF uncachable
[    0.000000]  E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]  0 base 0000000000 mask 7C00000000 write-back
[    0.000000]  1 base 0400000000 mask 7FC0000000 write-back
[    0.000000]  2 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]  3 base 00BC000000 mask 7FFC000000 uncachable
[    0.000000]  4 base 00BB800000 mask 7FFF800000 uncachable
[    0.000000]  5 base 043F800000 mask 7FFF800000 uncachable
[    0.000000]  6 base 043F600000 mask 7FFFE00000 uncachable
[    0.000000]  7 disabled
[    0.000000]  8 disabled
[    0.000000]  9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 16GB, type WB
[    0.000000] reg 1, base: 16GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 1GB, type UC
[    0.000000] reg 3, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 4, base: 3000MB, range: 8MB, type UC
[    0.000000] reg 5, base: 17400MB, range: 8MB, type UC
[    0.000000] reg 6, base: 17398MB, range: 2MB, type UC
[    0.000000] total RAM covered: 16302M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 128M        num_reg: 9      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3000MB, range: 8MB, type UC
[    0.000000] reg 3, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 4, base: 4GB, range: 4GB, type WB
[    0.000000] reg 5, base: 8GB, range: 8GB, type WB
[    0.000000] reg 6, base: 16GB, range: 1GB, type WB
[    0.000000] reg 7, base: 17398MB, range: 2MB, type UC
[    0.000000] reg 8, base: 17400MB, range: 8MB, type UC
[    0.000000] e820 update range: 00000000bb800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] initial memory mapped : 0 - 00e00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037600000 page 2M
[    0.000000]  0037600000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-17000
[    0.000000] RAMDISK: 37fce000 - 37fefa7b
[    0.000000] Allocated new RAMDISK: 00014000 - 00035a7b
[    0.000000] Move RAMDISK from 0000000037fce000 - 0000000037fefa7a to 00014000 - 00035a7a
[    0.000000] ACPI: RSDP 000f0490 00024 (v02 ALASKA)
[    0.000000] ACPI Warning: BIOS XSDT has NULL entry, using RSDT (20090903/tbutils-585)
[    0.000000] ACPI: RSDT ba3c0028 0004C (v01 ALASKA    A M I 01072009 MSFT 00010013)
[    0.000000] ACPI: FACP ba3c0100 00084 (v02 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT ba3c0188 0AE12 (v02 ALASKA    A M I 000000F5 INTL 20091112)
[    0.000000] ACPI: FACS ba4a2040 00040
[    0.000000] ACPI: APIC ba3cb0b0 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT ba3cb128 00539 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT ba3cb668 00AD8 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: MCFG ba3cc140 0003C (v01                01072009 MSFT 00000097)
[    0.000000] ACPI: HPET ba3cc180 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT ba3cc1b8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT ba3cc528 03299 (v01 SaSsdt  SaSsdt  00003000 INTL 20091112)
[    0.000000] ACPI: DMAR ba3cf7c8 000B8 (v01 INTEL      HSW  00000001 INTL 00000001)
[    0.000000] ACPI: MATS ba3cf880 00034 (v02 ALASKA    A M I 00000002 w?x2 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 16510MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]  mapped low ram: 0 - 377fe000
[    0.000000]  low ram: 0 - 377fe000
[    0.000000]  node 0 low ram: 00000000 - 377fe000
[    0.000000]  node 0 bootmap 00036000 - 0003cf00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]  #0 [0000000000 - 0000001000]  BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]  #2 [0000006000 - 0000007000]      TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]  #3 [0000400000 - 0000902984]    TEXT DATA BSS ==> [0000400000 - 0000902984]
[    0.000000]  #4 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
[    0.000000]  #5 [0000903000 - 000090a1f9]              BRK ==> [0000903000 - 000090a1f9]
[    0.000000]  #6 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
[    0.000000]  #7 [0000014000 - 0000035a7b]      NEW RAMDISK ==> [0000014000 - 0000035a7b]
[    0.000000]  #8 [0000036000 - 000003d000]          BOOTMAP ==> [0000036000 - 000003d000]
[    0.000000] found SMP MP-table at [c00fd740] fd740
[    0.000000] Zone PFN ranges:
[    0.000000]  DMA      0x00000010 -> 0x00001000
[    0.000000]  Normal  0x00001000 -> 0x000377fe
[    0.000000]  HighMem  0x000377fe -> 0x0043f600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]    0: 0x00000010 -> 0x0000009d
[    0.000000]    0: 0x00000100 -> 0x000a74b4
[    0.000000]    0: 0x000a74bb -> 0x000a844a
[    0.000000]    0: 0x000a8986 -> 0x000ba1a8
[    0.000000]    0: 0x000bafff -> 0x000bb000
[    0.000000]    0: 0x00100000 -> 0x0043f600
[    0.000000] On node 0 totalpages: 4166131
[    0.000000] free_area_init_node: node 0, pgdat c07fc5c0, node_mem_map c1001200
[    0.000000]  DMA zone: 32 pages used for memmap
[    0.000000]  DMA zone: 0 pages reserved
[    0.000000]  DMA zone: 3949 pages, LIFO batch:0
[    0.000000]  Normal zone: 1744 pages used for memmap
[    0.000000]  Normal zone: 221486 pages, LIFO batch:31
[    0.000000]  HighMem zone: 33021 pages used for memmap
[    0.000000]  HighMem zone: 3905899 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:38600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c9a00000 s33752 r0 d23592 u524288
[    0.000000] pcpu-alloc: s33752 r0 d23592 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4131334
[    0.000000] Kernel command line: root=UUID=55b79863-dba2-4a0d-9675-9781a65816b2 panic=10 quiet ro
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Initializing HighMem for node 0 (000377fe:0043f600)
[    0.000000] Memory: 16517664k/17815552k available (2635k kernel code, 145628k reserved, 1475k data, 448k init, 15755680k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]    fixmap  : 0xffd55000 - 0xfffff000  (2728 kB)
[    0.000000]    pkmap  : 0xff800000 - 0xffa00000  (2048 kB)
[    0.000000]    vmalloc : 0xf7ffe000 - 0xff7fe000  ( 120 MB)
[    0.000000]    lowmem  : 0xc0000000 - 0xf77fe000  ( 887 MB)
[    0.000000]      .init : 0xc0804000 - 0xc0874000  ( 448 kB)
[    0.000000]      .data : 0xc0692dd6 - 0xc0803ca8  (1475 kB)
[    0.000000]      .text : 0xc0400000 - 0xc0692dd6  (2635 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU-based detection of stalled CPUs is enabled.
[    0.000000] NR_IRQS:1280
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 3392.281 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.56 BogoMIPS (lpj=3392281)
[    0.000014] Security Framework initialized
[    0.000016] SELinux:  Initializing.
[    0.000019] SELinux:  Starting in permissive mode
[    0.000024] Mount-cache hash table entries: 512
[    0.000130] CPU: Physical Processor ID: 0
[    0.000131] CPU: Processor Core ID: 0
[    0.000133] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.000134] CPU: L2 cache: 256K
[    0.000134] CPU: L3 cache: 6144K
[    0.000137] mce: CPU supports 9 MCE banks
[    0.000146] CPU0: Thermal monitoring enabled (TM1)
[    0.000147] CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
[    0.000155] using mwait in idle threads.
[    0.000156] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[    0.000159] ... version:                3
[    0.000159] ... bit width:              48
[    0.000160] ... generic registers:      8
[    0.000161] ... value mask:            0000ffffffffffff
[    0.000162] ... max period:            000000007fffffff
[    0.000162] ... fixed-purpose events:  3
[    0.000163] ... event mask:            00000007000000ff
[    0.000167] Checking 'hlt' instruction... OK.
[    0.004251] ACPI: Core revision 20090903
[    0.027852] Not enabling x2apic, Intr-remapping init failed.
[    0.027855] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028170] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.038144] CPU0: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz stepping 03
[    0.139887] Booting processor 1 APIC 0x2 ip 0x6000
[    0.150202] Initializing CPU#1
[    0.210635] CPU: Physical Processor ID: 0
[    0.210636] CPU: Processor Core ID: 1
[    0.210637] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.210638] CPU: L2 cache: 256K
[    0.210639] CPU: L3 cache: 6144K
[    0.210649] CPU1: Thermal monitoring enabled (TM1)
[    0.210650] CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:2 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[    0.210714] CPU1: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz stepping 03
[    0.210719] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.230712] Booting processor 2 APIC 0x4 ip 0x6000
[    0.240983] Initializing CPU#2
[    0.301364] CPU: Physical Processor ID: 0
[    0.301364] CPU: Processor Core ID: 2
[    0.301366] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.301367] CPU: L2 cache: 256K
[    0.301367] CPU: L3 cache: 6144K
[    0.301378] CPU2: Thermal monitoring enabled (TM1)
[    0.301379] CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:2 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[    0.301439] CPU2: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz stepping 03
[    0.301443] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.321436] Booting processor 3 APIC 0x6 ip 0x6000
[    0.331706] Initializing CPU#3
[    0.392092] CPU: Physical Processor ID: 0
[    0.392093] CPU: Processor Core ID: 3
[    0.392094] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.392095] CPU: L2 cache: 256K
[    0.392096] CPU: L3 cache: 6144K
[    0.392106] CPU3: Thermal monitoring enabled (TM1)
[    0.392107] CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:2 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
[    0.392162] CPU3: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz stepping 03
[    0.392166] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.412127] Brought up 4 CPUs
[    0.412128] Total of 4 processors activated (27135.74 BogoMIPS).
[    0.414361] regulator: core version 0.5
[    0.414421] NET: Registered protocol family 16
[    0.414601] ACPI: bus type pci registered
[    0.414717] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    0.414719] PCI: MCFG area at f8000000 reserved in E820
[    0.414720] PCI: Using MMCONFIG for extended config space
[    0.414720] PCI: Using configuration type 1 for base access
[    0.417794] bio: create slab <bio-0> at 0
[    0.418748] ACPI: EC: Look up EC in DSDT
[    0.425941] ACPI: Executed 1 blocks of module-level executable AML code
[    0.432353] ACPI: BIOS _OSI(Linux) query ignored
[    0.440050] ACPI: Interpreter enabled
[    0.440053] ACPI: (supports S0 S3 S5)